Toshiba Satellite U405D-S2902 RAM Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

The RAM is the amount of data that can be accessed at the same time. By upgrading this, you will be able to multitask and run more programs without slowing down the computer. Before beginning this guide, make sure to have purchased the memory board you wish to install.

Cosa ti serve

Passo 1 RAM

Toshiba Satellite U405D-S2902 RAM Replacement, RAM: passo 1, immagine 1 di 2

Toshiba Satellite U405D-S2902 RAM Replacement, RAM: passo 1, immagine 2 di 2

Lay the device face down with the battery facing away from you. Locate the center panel. It will have two vents in it and three screws on the left side.
Loosen the three screws that hold the rear access panel on, using your Phillips #1 Screwdriver.
The screws will not actually come out from the panel but will be loose and let the panel come off.
Lift the left side of the panel to remove it.

Traduci

Passo 2

Locate and pull back the two mounting clips on either side of the memory chip.
Be sure that when replacing the board, push down gently until the clips snap back in.

Traduci