Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.
-
Carefully pull the top away from the back.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the laptop around.
-
Remove the webcam/microphone data cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the lower lighting power supply.
-
Remove the signal light power supply and data cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the screen from the side brackets.
-
Remove the LCD ribbon connector from the display.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.