Salta al contenuto principale

Introduzione

If you find that your laptop is sluggish when many programs are running, freezing, or randomly restarting. It may be time to add more RAM or replace the RAM currently in the laptop.

  1. Unscrew the single Phillips #0 screw from the RAM panel.
    • Unscrew the single Phillips #0 screw from the RAM panel.

  2. Remove the panel.
    • Remove the panel.

  3. Skip the upgrade.

    Ottieni $10 di sconto su $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Spread the clips away from the RAM module. When released, the RAM module will pop up at a slight angle.
    • Spread the clips away from the RAM module.

    • When released, the RAM module will pop up at a slight angle.

  5. Lift the RAM module to an angle of about 30 degrees and slide it out. Lift the RAM module to an angle of about 30 degrees and slide it out.
    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

When installing the new RAM, push the RAM sticks in at an angle. Proceed to push each RAM stick down until the latches click, indicating that it is locked in.

Un'altra persona ha completato questa guida.

William Mazanec

Membro da: 29/01/2018

1.236 Reputazione

8 Guide realizzate

Team

USF Tampa, Team S5-G6, Passmore Spring 2018 Membro di USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 110