Introduzione

If you feel that your laptop is becoming hot to the touch, or you hear the fan spin up more often than usual. It may be time to clean out the processor fan or replace it entirely.

  1. Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.
    • Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.

    Aggiungi Commento

  2. Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.
    • Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.

    Aggiungi Commento

    • Remove the four 5mm Phillips #0 screws from the battery.

    • Unplug the battery from the motherboard.

    • Remove the battery from the laptop.

    Aggiungi Commento

    • Remove the two 5mm Phillips #0 screws from the fan.

    Aggiungi Commento

    • Disconnect the fan from the motherboard.

    Aggiungi Commento

    • Remove the four 5mm Phillips #0 screws from the heat pipe.

    • Remove the fan and heat pipe from the laptop.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

William Mazanec

Membro da: 29/01/2018

1.236 Reputazione

8 Guide realizzate

Team

USF Tampa, Team S5-G6, Passmore Spring 2018 Membro di USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 9

Tutti i Tempi: 68