Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the locking tabs away from each other.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 3mm Phillips #0 screw from the cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to lift up the cover and remove by hand.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.
-
Lift the RAM module to an angle of about 30 degrees and slide it out.
-