Introduzione

The RAM card is the part of the computer that has memory and stores the data being used by the computer. It keeps the computer's functions regulating smoothly. Below are a few steps to take in order to remove and replace the computer's RAM Cards.

Parti

Nessuna parte richiesta.

Push the locking tabs away from each other.
  • Push the locking tabs away from each other.

Aggiungi Commento

Pull up on the battery to remove.
  • Pull up on the battery to remove.

Aggiungi Commento

  • Remove the 3mm Phillips #0 screw from the cover.

Aggiungi Commento

  • Use a plastic opening tool to lift up the cover and remove by hand.

Aggiungi Commento

  • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


    • When released, the RAM module will pop up at a slight angle.

  • 
Lift the RAM module to an angle of about 30 degrees and slide it out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Benson Smith

Membro da: 25/01/2018

327 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S20-G3, Passmore Spring 2018 Membro di USF Tampa, Team S20-G3, Passmore Spring 2018

USFT-PASSMORE-S18S20G3

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 50