Introduzione

This guide will show you how to replace the RAM on your laptop. There are two RAM slots in this laptop that can be swapped out for other RAM chips.

Parti

Nessuna parte richiesta.

  1. To prevent injury, ensure the laptop is powered off before starting your work. Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.
    • To prevent injury, ensure the laptop is powered off before starting your work.

    • Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.

  2. Be careful to not crack the panel where the USB and power cord ports are. Insert the opening tool in between the back panel and the laptop to pry it open. The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.
    • Be careful to not crack the panel where the USB and power cord ports are.

    • Insert the opening tool in between the back panel and the laptop to pry it open.

    • The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.

    • Lift the panel from the front off of the laptop.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. The battery is located in the bottom right corner of the laptop. Remove the four .5mm Phillips head screws on the battery using the PH1 screwdriver. Remove the four .5mm Phillips head screws on the battery using the PH1 screwdriver.
    • The battery is located in the bottom right corner of the laptop.

    • Remove the four .5mm Phillips head screws on the battery using the PH1 screwdriver.

  5. Do not tug on the cord or battery. Instead, pull evenly on the connector. Lift the battery and gently pull out the bundled cable connector.
    • Do not tug on the cord or battery. Instead, pull evenly on the connector.

    • Lift the battery and gently pull out the bundled cable connector.

  6. Lift up the flap to expose the RAM chip. Un-clip the RAM by pulling the metal clips away from the chip on both sides. Lift the RAM up from the laptop and pull it away from the connector.
    • Lift up the flap to expose the RAM chip.

    • Un-clip the RAM by pulling the metal clips away from the chip on both sides.

    • Lift the RAM up from the laptop and pull it away from the connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Alec Bonnell

Membro da: 18/10/2017

434 Reputazione

4 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 126