Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Orient the laptop so that it is closed, faced down and has the battery facing away from you.
-
Use the Phillips 00 screwdriver to remove the 7.50mm screw from the panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the laptop 90 degrees clockwise.
-
Pull back the two silver clips that hold the RAM in place.
-
Gently pull the RAM out of the slot and lift up to remove the RAM from the laptop.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #00 screwdriver to remove the 6.50mm screw holding the gray metal bracket in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the back side of the optical drive out of the laptop using the plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the optical drive out of the laptop using your fingers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Phillips 00 screwdriver, unscrew the two 2.50mm screws that connect the metal bracket to the optical drive.
-
Remove the bracket from optical drive.
-