Salta al contenuto principale

Introduzione

Replacing the hard drive in your laptop is a beginner level repair, which can easily be executed.

Parti

Nessuna parte specificata.

  1. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.
    • Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.

  2. Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Remove the screw located under the plastic tab. Remove the screw located under the plastic tab.
    • Remove the screw located under the plastic tab.

  5. Remove the hard drive by pulling the tab upwards and sliding the hard drive out. Remove the hard drive by pulling the tab upwards and sliding the hard drive out.
    • Remove the hard drive by pulling the tab upwards and sliding the hard drive out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Jerry Wakai

Membro da: 31/01/2013

335 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 7-7, Maness Winter 2013 Membro di Cal Poly, Team 7-7, Maness Winter 2013

CPSU-MANESS-W13S7G7

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 19

Tutti i Tempi: 2,744