Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

This guide will help in the replacement of a broken cooling fan with heat sink in your laptop. The purpose of the fan is to pull cool air in to prevent overheating in the laptop. To fix this broken part, this guide will instruct you how to replace the cooling fan by removing the lower cover to access it.

Cosa ti serve

Passo 1 Battery

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Battery: passo 1, immagine 1 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Battery: passo 1, immagine 2 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Battery: passo 1, immagine 3 di 3

Make sure you turn the laptop off first.
Close the laptop lid and flip it over so that Toshiba logo is facing down.

Traduci

Passo 2

Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Traduci

Passo 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink: passo 3, immagine 3 di 3

Once the screws are removed, slide the battery pack out of the computer.

Traduci

Passo 4 Back Panel

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Back Panel: passo 4, immagine 1 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Back Panel: passo 4, immagine 2 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Back Panel: passo 4, immagine 3 di 3

Attrezzo utilizzato in questo passaggio:

Anti-Static Wrist Strap

$7.95

Compra

Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.
Use the plastic opening tool to remove the back cover from the laptop.
Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Traduci

Passo 5 Cooling Fan with Heat Sink

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Cooling Fan with Heat Sink: passo 5, immagine 1 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Cooling Fan with Heat Sink: passo 5, immagine 2 di 3

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink, Cooling Fan with Heat Sink: passo 5, immagine 3 di 3

The ribbon and wire must be moved out of the way of the fan.
Using a black tweezer tool, lift the tab holding the ribbon in place and then gently pull it out.
Using the same tweezer tool, again lift the tab holding the wires in place and gently pull them out.

Traduci

Passo 6

Unscrew the two 3mm Phillips head screws on each fan using the Phillips #00 screwdriver.

Traduci

Passo 7

Toshiba Satellite L55t-B5271 Cooling Fan Replacement with Heat Sink: passo 7, immagine 3 di 3

Unscrew the four, 3mm Phillips head screws holding the last piece to the laptop using a Phillips #00 screwdriver.
Gently pull the cooling fan with heat sink off the laptop and set aside.

Traduci