Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Before starting any removal or installation, remember to turn off the device and to remove it from the power source.
Cosa ti serve
-
-
Use the flat edge of the plastic opening tool to pry open the narrow plastic strip above the keyboard.
-
-
-
Flip the laptop over to access the battery.
-
Remove the battery by sliding fingers away from each other and lifting up the tab at the same time.
-
-
-
-
Remove the following with a Phillips #00 Screwdriver:
-
Six 7mm Phillips Head screws
-
One 5 mm Phillips Head screw
-
Remove the LCD screen tab
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.