Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Use this guide to remove housing on the base of your Toshiba Satellite L305-S5946. Removing the housing gives you access to the motherboard, processor, power jack, fan, and LCD screen.
Cosa ti serve
-
-
Loosen the two captive screws on the bottom left corner of the hard drive using a Phillips #1 screwdriver until you hear a click.
-
-
-
Using a Phillips #1 screwdriver, turn the screw on the RAM cover until you hear a click.
-
-
-
-
Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.
-
Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.
-
Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.
-
Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.