Salta al contenuto principale

Introduzione

If you want to replace the HDD or the RAM memory, or you plan to make an upgrade, this video will help you.

The video manual is for both models, start with Satellite C850 and continue at 2:05 with Satellite C660.


Please SUBSCRIBE to my channel ツ

Panoramica Video

  1. Remove the battery. Unscrew 1x Phillips screw and disassemble the HDD / RAM memory cover. Unscrew 1x Phillips screw and disassemble the HDD / RAM memory cover.
    • Remove the battery.

    • Unscrew 1x Phillips screw and disassemble the HDD / RAM memory cover.

  2. Use a plastic tool and an anti static gloves to pull out the memory modules. If you have not, then hold the board only at the ends. If you plan to make an upgrade, first of all check the specification of yours model. Depending of the Chipset and the producer, every laptop have a limit of the expansion of the RAM memory.
    • Use a plastic tool and an anti static gloves to pull out the memory modules.

    • If you have not, then hold the board only at the ends.

    • If you plan to make an upgrade, first of all check the specification of yours model. Depending of the Chipset and the producer, every laptop have a limit of the expansion of the RAM memory.

    • Check exactly type of the used memory modules. This models use DDR3 technology.

    • You can use modules with a different speed but the processor will work with them at the speed of the slower one.

    • Some modules will not work together.

  3. Now let's remove the HDD. Now let's remove the HDD. Now let's remove the HDD.
    • Now let's remove the HDD.

    • Remove the hard drive by sliding it away from the port towards the screw hole.

  4. Unscrew the 4x Phillips screws and separate the HDD from the HDD caddy. You can upgrade your HDD to maximum 1TB.
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

166.806 Reputazione

305 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

288 Membri

822 Guide realizzate

I dunno, I would class this as easy peasy. One captive screw. No need for tool to remove ram, it pops up when you flex open the metal bits. Doing it with fingers is way easier.

While you can remove the 4 screws to remove and transplant the bit of plastic onto the new drive, a dab of sugru to secure 20 quid ssd drive will do the job. Upgrading these things tales less than 5 minutes.

Beyond utility - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 92

Tutti i Tempi: 4,988