1. Push the left tab with your left hand.
    • Push the left tab with your left hand.

    • Then push the right tab with your right hand.

    • While your right hand is still pushing, remove the battery with your left hand.

    Aggiungi Commento

  2. Remove this screw with a JIS #000 screwdriver.
    • Remove this screw with a JIS #000 screwdriver.

    • This screw does not come out all the way.

    Aggiungi Commento

    • Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.

    Aggiungi Commento

    • Using the JIS #000 screwdriver, remove the .5mm screw.

    Aggiungi Commento

    • Use the plastic opening tool to remove the keyboard from the laptop.

    Aggiungi Commento

    • Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

    Aggiungi Commento


To reassemble your device, follow these instructions in reverse order.

Step has the incorrect screw to release the keyboard. There is no need to open the back panel. The screw which holds down the keyboard is the long screw between the Serial Number sticker and the battery release switch #2.

Anthony Francisco - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 12

Tutti i Tempi: 91