Toshiba Satellite C55-B5302 Keyboard Replacement

Introduzione

These steps will help guide you to removing the keyboard from your Toshiba Satellite C55-B5302 laptop. This will be more of a time consuming project. Make sure you have all the correct tools.

Cosa ti serve

Passo 1 Battery

Toshiba Satellite C55-B5302 Keyboard Replacement, Battery: passo 1, immagine 1 di 2

Toshiba Satellite C55-B5302 Keyboard Replacement, Battery: passo 1, immagine 2 di 2

Flip laptop upside down so you can see the screws.

Modifica

Passo 2

Using the Phillips #0 screwdriver, remove the two 7 mm screws from the back casing.

Modifica

Passo 3

Pull the battery from the back of the laptop for removal from the laptop.

Modifica

Passo 4 Fan

Toshiba Satellite C55-B5302 Keyboard Replacement, Fan: passo 4, immagine 1 di 3

Toshiba Satellite C55-B5302 Keyboard Replacement, Fan: passo 4, immagine 2 di 3

Toshiba Satellite C55-B5302 Keyboard Replacement, Fan: passo 4, immagine 3 di 3

Remove the remaining 7 mm screws on the back panel of the laptop with a Phillips #0 screwdriver.
Use the plastic opening tool to pry up a corner of the back panel and continue to pop the back panel off.
Expect to hear popping as you pull the back panel off.

Modifica

Passo 5

Disconnect the fan wire from the motherboard.

Modifica

Passo 6

Toshiba Satellite C55-B5302 Keyboard Replacement: passo 6, immagine 3 di 3

Remove the three 3 mm screws with a Phillips #00 screwdriver.
Remove the 5 mm screw with a Phillips #0 screwdriver.

Modifica

Passo 7

You can now lift the fan out of the laptop.

Modifica

Passo 8 Keyboard

Toshiba Satellite C55-B5302 Keyboard Replacement, Keyboard: passo 8, immagine 1 di 2

Toshiba Satellite C55-B5302 Keyboard Replacement, Keyboard: passo 8, immagine 2 di 2

The hard drive is held in place with a soft, blue rubber retainer. The retainer can be disconnected by pulling up on the two tabs at the left side of the hard drive in these images.

Modifica

Passo 9

Gently pull the hard drive away from the connection to remove it from the laptop.

Modifica

Passo 10

Using a Phillips #00 screwdriver, remove the three 3 mm screws on the board with white arrows pointing to them.

Modifica

Passo 11

Toshiba Satellite C55-B5302 Keyboard Replacement: passo 11, immagine 3 di 3

Disconnect the ribbon cables so that you can peel back the keyboard ribbon cable to free it.
Remove the 5 mm screw from the chip under the metallic ribbon next to the memory card and disconnect the chip. Use a #0 Phillips screwdriver.

Modifica

Passo 12

Slide the circuit board toward you so that you can access the keyboard ribbon cable.
Separate the keyboard ribbon cable from the plastic it sticks to so that it is free.

Modifica

Passo 13

Open the laptop so you can see the keyboard.

Modifica

Passo 14

Use one plastic opening tool to slightly pry up the left control key and use another plastic opening tool to push the fasteners out of the way so that the keyboard begins to pop up
This is the hardest step and may take some time. You don't want to pop off the control key; just use enough pressure so that the keyboard will come up past each fastener when it gets the chance.

Modifica