Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Power down the laptop and remove all power cords. After this is done, turn the laptop over.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the battery latches outwards away from the center of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift and remove the battery from the device.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use tweezers to remove the screw covers in the lower corners of the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #1 screwdriver to unscrew the two screws in the lower corners of the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Start popping off the cover all the way around the screen until it comes off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws in the top corners with a Phillips #1 screwdriver. The screen will pop forward after removing the two screws.
-
Using the same Phillips #1 screwdriver, remove the three screws on the side of screen frame.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the back of screen, lift up the plastic film and screen connector. Pop out the connector, and gently remove the screen.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.