Aggiusta la tua roba Comunità Store

Toshiba Satellite A215-S7425 RAM Replacement

Scritto Da: Marianne (e 5 altri collaboratori)
  • Commenti: 0
  • Preferiti: 1

Difficoltà

Facile

Passi

7

Tempo Necessario

5 - 10 minuti

Sezioni

2

Contrassegni

1

Better Introduction

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

Strumenti

Ricambi

Nessuna parte specificata.

  1. Turn off the computer.

    • Turn off the computer.

    • Disconnect the charging cable from computer.

    • Failure to unplug the cable could result in electric shock.

    • Flip the computer upside down.

    Modifica

  2. Slide latches labeled #1 and #2, located outside the battery cover, away from each other.

    • Slide latches labeled #1 and #2, located outside the battery cover, away from each other.

    • Latch #1 will click over and stay while latch #2 will have to be held for battery to release.

    Modifica

  3. Gently lift and pull the battery out of the device.

    • Gently lift and pull the battery out of the device.

    Modifica

  5. Locate the RAM vented plastic cover in the center of the device.

    • Locate the RAM vented plastic cover in the center of the device.

    Modifica

  6. Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks. Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks.

    • Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks.

    Modifica

  7. Locate 2 metal pinchers on either side of the 1st RAM stick. Use a finger from each hand to push the 2 pinchers simultaneously away from the stick of RAM and towards the exterior of the case. The RAM stick will automatically rise up. Gently pull out the RAM stick with one hand.

    • Locate 2 metal pinchers on either side of the 1st RAM stick.

    • Use a finger from each hand to push the 2 pinchers simultaneously away from the stick of RAM and towards the exterior of the case.

    • The RAM stick will automatically rise up. Gently pull out the RAM stick with one hand.

    • The use of a anti-static wrist strap while working with the RAM is advise to prevent electrostatic discharge(ESD) from damaging the RAM.

    Modifica

  8. To remove the 2nd RAM stick, repeat previous steps. You will be unable to remove 2nd RAM stick if the first one is not removed first. You will be unable to remove 2nd RAM stick if the first one is not removed first.

    • To remove the 2nd RAM stick, repeat previous steps.

    • You will be unable to remove 2nd RAM stick if the first one is not removed first.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Marianne

Membro da: 08/09/2014

647 Reputazione

6 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Pasco Hernando, Team 5-2, Prince Fall 2014 Membro di Pasco Hernando, Team 5-2, Prince Fall 2014

PHSC-PRINCE-F14S5G2

10 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 195