Salta al contenuto principale

Introduzione

The purpose of this guide is to provide step-by-step instructions for replacing your hard drive. For this process you will need a Phillips #00 screwdriver.

Parti

Nessuna parte specificata.

  1. Locate the hard drive cover on the bottom, left-hand corner of your laptop.
    • Locate the hard drive cover on the bottom, left-hand corner of your laptop.

    • Using a Phillips #00 screwdriver, remove both 4mm screws.

  2. Kits di riparazione iPhone X

    Garanzia finita? Non preoccuparti, abbiamo la soluzione.

    Acquista ora

    Kits di riparazione iPhone X

    Garanzia finita? Non preoccuparti, abbiamo la soluzione.

    Acquista ora
  3. Lift the cover to reveal the old hard drive.
    • Lift the cover to reveal the old hard drive.

    • Carefully detach the hard drive from the SATA/Power connector.

  4. After removing the old hard drive, place the new hard drive into the bay, and  firmly reattach it to the SATA/Power connector.
    • After removing the old hard drive, place the new hard drive into the bay, and firmly reattach it to the SATA/Power connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Membro da: 07/04/2013

102 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 17-6, Regan Spring 2013 Membro di Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 18

Tutti i Tempi: 1,620