Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Hold the release switch and pull out the battery towards you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the laptop so the display screen is bent fully back with the display facing upward, parallel to the surface you are working on.
-
Wedge the Phillips 00 screwdriver above the F1 key, and separate the top piece of plastic from the body of the laptop. Don't worry about breaking it! You will need to forcefully wedge the screwdriver under the plastic, simultaneously pushing upward and forward.
-
Once that section has popped up, work on pulling the rest of the plastic piece up and out, alternating from left to right.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Completely remove the plastic piece from the body of the laptop.
-
Using the Phillips 1 screwdriver, unscrew the two 3mm screws located at the top corners of the keyboard. (See the second picture for additional clarification.)
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Without yanking, lift the keyboard up carefully.
-
Now that the board is free, cautiously undo and pull free the ribbon that connects the keyboard to the body of the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the laptop over, so that you are now looking at the bottom of the laptop.
-
Using the Phillips #1 screwdriver remove the fourteen 6mm screws.
-
Using the Phillips #1 screwdriver remove the three 4mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Completely remove the display piece by pulling between the silver display-component and the black bottom-component. The display- component is an all-in-one component pictured here.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the #00 Phillips Screwdriver, remove the single screw that holds the optical drive in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Simply push the disk drive to the left, as demonstrated in the picture, until the disk drive is completely outside of the casing.
-