Aggiusta la tua roba Comunità Store

Toshiba Encore WT8-A Tablet Motherboard Replacement

Introduzione

This guide is intended to show tablet owners how they can take their device apart in order to replace the motherboard.

Cosa ti serve

  1. Toshiba Encore WT8-A Tablet Motherboard Replacement, Battery: passo 1, immagine 1 di 1

    • Use the metal spudger to create a gap between the back cover and the device.

    • Be gentle when using the metal spudger so that the casing is not damaged.

    Traduci

  2. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 2, immagine 1 di 2 Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 2, immagine 2 di 2

    • Use the nylon spudger to completely separate the back of the device.

    • Take the nylon spudger around the outside of the device cover until it comes free.

    Traduci

  3. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 3, immagine 1 di 2 Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 3, immagine 2 di 2

    • Use the Phillips head PH0 to remove the 7 battery screws.

    • The 5 side screws measure 3.5mm.

    • The 2 top and bottom screws measure 4.5 mm.

    Traduci

  5. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 4, immagine 1 di 2 Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 4, immagine 2 di 2

    • To disconnect the cable, use the fine tweezers to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • The zero insertion force (ZIF) connector is used to secure delicate ribbon cables, such as this trackpad cable.

    Traduci

  6. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 5, immagine 1 di 1

    • Remove the colored power cable from its connector.

    • To disconnect it safely, use the pointed tip of a spudger to carefully push on each side of the connector.

    • Alternating from one side to the other, gently “walk” the connector out of its socket.

    • Be sure to be very gentle when prying colored wires from motherboard to ensure that there is no damage.

    Traduci

  7. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 6, immagine 1 di 1

    • Battery will lift out of the device.

    Traduci

  8. Toshiba Encore WT8-A Tablet Motherboard Replacement, Motherboard: passo 7, immagine 1 di 1

    • Remove the 4 – 4.5 mm screws from the motherboard assembly.

    Traduci

  9. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 8, immagine 1 di 1

    • Remove the 2 – 3.5 mm screws from the motherboard assembly.

    Traduci

  10. Toshiba Encore WT8-A Tablet Motherboard Replacement: passo 9, immagine 1 di 1

    • The motherboard should come free at this point.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Zachary Armstrong

Membro da: 09/15/16

293 Reputazione

2 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

USF Tampa, Team 17-4, Blackwell Fall 2016 Membro di USF Tampa, Team 17-4, Blackwell Fall 2016

USFT-BLACKWELL-F16S17G4

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,020