Salta al contenuto principale

Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    • After this procedure there seemed to be more back light bleed on my tablet. Not sure if it was there before so be careful.

    • Remove the tablet from the dock.

    • Find the best place to insert your plastic pry tool (I used the Micro-SD slot). Carefully go around the perimeter of the tablet and unclip the back cover.

    • Take note off all the clips. The back cover is held in place with a ton of these all around.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 3 : passo 2, immagine 2 di 3 : passo 2, immagine 3 di 3
    • Once you have the back cover off you are free to replace what you'd like.

    • Msata SSD Part #MZMTE128HMGR-0000

    • M.2 2230 WiFi Model #7260NGW

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 3 : passo 3, immagine 2 di 3 : passo 3, immagine 3 di 3
    • Battery Model #PA5190U-1BRS

    • Motherboard Part #DAOZC1MBADO REV:D

    • Capacitive button/dock board Part #3TCZ1T80000

    • Re-assembly in reverse order.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 3 : passo 4, immagine 2 di 3 : passo 4, immagine 3 di 3
    • With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6.

    • Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A

    • Keyboard boards and weights.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 3 : passo 5, immagine 2 di 3 : passo 5, immagine 3 di 3
    • The keyboard dock board. Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on.

    • Keyboard board Part #CZ1D30E51001CC

    • Mouse board, left-hand weight, front LED board.

    • Re-assembly in reverse order.

Sasa Macura

Membro da: 08/05/14

177 Reputazione

2 Guide realizzate

3 Commenti

lindas fotos pero no hay un video que muestre como demontar la tapa.

ximena - Replica

muy ilustrativas las imagenes.. tendras algunas donde se vea el mecanismo del teclado donde sujeta a la pantalla ?

carlos - Replica

i need keyboard for this lap how i can get it

Hussien Mahmoud - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 7,475