Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Over time, speaker quality can degrade for a variety of reasons. Replacing the speakers will fix most issues involving sound and sound quality.

Parti

Nessuna parte specificata.

  1. Remove all external devices from the Toshiba Chromebook 2.
    • Remove all external devices from the Toshiba Chromebook 2.

  2. Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.
    • Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.

  3. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.
    • Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.

  4. Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the  Phillips #0 screwdriver. The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.
    • Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.

    • The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.

  5. Remove the back panel by pulling up on 2 adjacent corners.
    • Remove the back panel by pulling up on 2 adjacent corners.

  6. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.
    • Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.

  7. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.
    • Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.

  8. Remove the battery by gently pulling up on the bottom corners.
    • Remove the battery by gently pulling up on the bottom corners.

  9. Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.
    • Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.

  10. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.
    • Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.

  11. Remove the speakers by lifting upwards.
    • Remove the speakers by lifting upwards.

    • Wiring connecting the left and right speakers may be taped to the top of the battery. Simply remove the tape to remove the speakers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Alec Marnoch

Membro da: 06/10/2016

233 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 10-4, Livingston Fall 2016 Membro di Cal Poly, Team 10-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G4

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 587