Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Using the tweezers, peel back the sticker on the bottom of the device to reveal the two screws
    • Using the tweezers, peel back the sticker on the bottom of the device to reveal the two screws

  2. Unscrew the two T-5 screws
    • Unscrew the two T-5 screws

  3. Shove the flat head screw driver into the edge of the device.  Pry the faceplate.
    • Shove the flat head screw driver into the edge of the device. Pry the faceplate.

  4. Release the ribbon cable.
    • Release the ribbon cable.

  5. Identify the green motherboard.
    • Identify the green motherboard.

    • Unscrew the threes screws holding the board in place.

  6. Remove the board and battery from the back plate.
    • Remove the board and battery from the back plate.

  7. Attach the board and battery to the new back plate.
    • Attach the board and battery to the new back plate.

  8. Put the green motherboard back into the back plate and secure with the 3 screws.
    • Put the green motherboard back into the back plate and secure with the 3 screws.

  9. Snap it back together!
    • Snap it back together!

  10. Insert T-5 screws and tighten.
    • Insert T-5 screws and tighten.

  11. Replace the label to hide screws.
    • Replace the label to hide screws.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Mike Sollars

Membro da: 11/07/2013

489 Reputazione

3 Guide realizzate

Team

WRI115, Team 1-1, Ruszkiewicz Spring 2013 Membro di WRI115, Team 1-1, Ruszkiewicz Spring 2013

WRI115-RUSZKIEWICZ-S13S1G1

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,011