Aggiusta la tua roba Comunità Store

TomTom GO 500 Speaker Replacement

Introduzione

The speaker is underneath the motherboard so power off the device before starting the disassembly.

Cosa ti serve

  1. TomTom GO 500 Speaker Replacement, TomTom GO 500 Opening the Device: passo 1, immagine 1 di 1

    • Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

    Traduci

  2. TomTom GO 500 Speaker Replacement: passo 2, immagine 1 di 2 TomTom GO 500 Speaker Replacement: passo 2, immagine 2 di 2

    • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

    • There are 14 latches that need to be undone.

    • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

    Traduci

  3. TomTom GO 500 Speaker Replacement: passo 3, immagine 1 di 1

    • With the screen casing unlatched, locate the right side where the two connectors are.

    Traduci

  4. TomTom GO 500 Speaker Replacement: passo 4, immagine 1 di 3 TomTom GO 500 Speaker Replacement: passo 4, immagine 2 di 3 TomTom GO 500 Speaker Replacement: passo 4, immagine 3 di 3

    • Unlatch the connectors using the plastic opening tool.

    • The orange rectangular connector may have come off in the process of removing the screen casing.

    Traduci

  6. TomTom GO 500 Speaker Replacement: passo 5, immagine 1 di 2 TomTom GO 500 Speaker Replacement: passo 5, immagine 2 di 2

    • Separate the screen casing from the motherboard casing.

    Traduci

  7. TomTom GO 500 Speaker Replacement, Motherboard: passo 6, immagine 1 di 1

    • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

    Traduci

  8. TomTom GO 500 Speaker Replacement: passo 7, immagine 1 di 2 TomTom GO 500 Speaker Replacement: passo 7, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Unplug the connector shown near the center of the motherboard using the tweezers.

    Traduci

  9. TomTom GO 500 Speaker Replacement: passo 8, immagine 1 di 2 TomTom GO 500 Speaker Replacement: passo 8, immagine 2 di 2

    • Unplug the second connector using the plastic opening tool.

    Traduci

  10. TomTom GO 500 Speaker Replacement: passo 9, immagine 1 di 2 TomTom GO 500 Speaker Replacement: passo 9, immagine 2 di 2

    • Remove the motherboard from the casing.

    Traduci

  11. TomTom GO 500 Speaker Replacement, Speaker: passo 10, immagine 1 di 1

    • The speaker is located next to the battery.

    Traduci

  12. TomTom GO 500 Speaker Replacement: passo 11, immagine 1 di 3 TomTom GO 500 Speaker Replacement: passo 11, immagine 2 di 3 TomTom GO 500 Speaker Replacement: passo 11, immagine 3 di 3

    • Pinch the speaker at the rubber grommets and tug gently.

    Traduci

  13. TomTom GO 500 Speaker Replacement: passo 12, immagine 1 di 3 TomTom GO 500 Speaker Replacement: passo 12, immagine 2 di 3 TomTom GO 500 Speaker Replacement: passo 12, immagine 3 di 3

    • Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Nicholas Maharaj

Membro da: 09/22/16

101 Reputazione

1 Guida realizzata

Distintivi: 3

Team

UC Davis, Team 2-5, Oliver Fall 2016 Membro di UC Davis, Team 2-5, Oliver Fall 2016

UCD-OLIVER-F16S2G5

5 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 434