Salta al contenuto principale

Toilet Seat Replacement

Cosa ti serve

  1. Toilet Seat Replacement, Toilet Seat: passo 1, immagine 1 di 1
    • Measure the size of your toilet bowl to know what size seat to purchase.

  2. Toilet Seat Replacement: passo 2, immagine 1 di 2 Toilet Seat Replacement: passo 2, immagine 2 di 2
    • Twist the tops of the hinges of the currently installed toilet seat and pull toilet seat off to expose the screws.

  3. Toilet Seat Replacement: passo 3, immagine 1 di 3 Toilet Seat Replacement: passo 3, immagine 2 di 3 Toilet Seat Replacement: passo 3, immagine 3 di 3
    • Unscrew the screws to detach the seat.

    • If the screw is not loosening but is spinning as if it were, then hold the back plastic nut so that it can unscrew from the nut.

    • Clean the newly exposed area. This opportunity will not present itself again anytime soon so take advantage of it.

  4. Toilet Seat Replacement: passo 4, immagine 1 di 2 Toilet Seat Replacement: passo 4, immagine 2 di 2
    • Insert new special 20mm screws that are provided with the purchase of the toilet seat in the holes and tighten them.

  5. Toilet Seat Replacement: passo 5, immagine 1 di 1
    • Then re install the toilet seat by fitting the heads of the screws in the holes on the hinges of the seat.

  6. Toilet Seat Replacement: passo 6, immagine 1 di 1
    • Close caps by twisting them in the opposite direction that you did to take off the seat.

Conclusione

To re-install your previous seat, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

Cal Poly, Team 24-5, Green Winter 2015 Membro di Cal Poly, Team 24-5, Green Winter 2015

CPSU-GREEN-W15S24G5

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,907