Salta al contenuto principale

Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement

Cosa ti serve

  1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: passo 1, immagine 1 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: passo 1, immagine 2 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: passo 1, immagine 3 di 3
    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    • Lay the sprayer down horizontally before continuing.

  2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure control knob: passo 2, immagine 1 di 1
    • Use a pick tool to scrape the red paint from the side of the pressure control knob.

  3. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: passo 3, immagine 1 di 2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: passo 3, immagine 2 di 2
    • Use a 2 mm Allen wrench to loosen the control knob.

  4. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: passo 4, immagine 1 di 2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: passo 4, immagine 2 di 2
    • Remove the pressure control knob.

  5. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: passo 5, immagine 1 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: passo 5, immagine 2 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: passo 5, immagine 3 di 3
    • Use a flathead screwdriver to pry and remove the clip securing the stop sleeve.

    • The stop sleeve will pop out slightly due to the compressed spring behind it.

    • During reassembly, compress the stop sleeve against the spring to fully insert the clip.

  6. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: passo 6, immagine 1 di 2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: passo 6, immagine 2 di 2
    • Remove the stop sleeve.

  7. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: passo 7, immagine 1 di 2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: passo 7, immagine 2 di 2
    • Remove the pressure spring.

  8. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: passo 8, immagine 1 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: passo 8, immagine 2 di 3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: passo 8, immagine 3 di 3
    • Use an adjustable wrench to remove the regulator assembly.

    • Your assembly may have red threadlocker around its threads.

    • During reassembly, consider applying new threadlocker to your replacement assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Alex Diaz-Kokaisl

Membro da: 01/16/22

124.642 Reputazione

582 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

17.299 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 31

Tutti i Tempi: 486