Aggiusta la tua roba Comunità Store

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Introduzione

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: passo 1, immagine 1 di 2 Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: passo 1, immagine 2 di 2

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

    Traduci

  3. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: passo 2, immagine 1 di 1

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Dawoud Daoud

Membro da: 02/14/24

199 Reputazione

2 Guide realizzate

Distintivi: 3

Team

University of Memphis, Team 3-5, Sneed Spring 2024 Membro di University of Memphis, Team 3-5, Sneed Spring 2024

UM-SNEED-S24S3G5

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 79