Parti

  1. Here are the tools you will need:
    • Here are the tools you will need:

      • Standard Screwdriver

      • New Pannier Whole Clip Bracket

      • Wrench

    Aggiungi Commento

  2. To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).
    • To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

    Aggiungi Commento

    • Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

    Aggiungi Commento

    • Remove old clip. Take new clip bracket and unscrew and remove middle clip.

    Aggiungi Commento

    • Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.

    • As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

    Aggiungi Commento

    • You're done!

    Aggiungi Commento

Linea Traguardo

Emilee

Membro da: 13/03/2014

1.341 Reputazione

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 999