Introduzione

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Parti

Nessuna parte richiesta.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Aggiungi Commento

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Aggiungi Commento

  • Lift the cover up and off the device.

Aggiungi Commento

  • Locate the power supply.

Aggiungi Commento

  • Remove the belt connecting the power supply to the motherboard by pulling it out.

Aggiungi Commento

  • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

Aggiungi Commento

  • Remove the two 0.31 inch T-9 screws from the power supply.

Aggiungi Commento

  • Pinch the plastic plugs and lift the power supply up to detach from plugs.

  • All 4 plugs must be detached to remove power supply.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Membro da: 11/10/2011

41 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 5-33, Amido Fall 2011 Membro di Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,046