Introduzione

This guide describes how to replace the hard drive.

Parti

Nessuna parte richiesta.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Aggiungi Commento

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Aggiungi Commento

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Aggiungi Commento

Locate the hard drive.
  • Locate the hard drive.

Aggiungi Commento

Remove the ribbon cable by applying firm pressure to the black tabs on the sides. Remove the power cable to the right of the ribbon cable.
  • Remove the ribbon cable by applying firm pressure to the black tabs on the sides.

  • Remove the power cable to the right of the ribbon cable.

Aggiungi Commento

Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.
  • Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Talha

Membro da: 11/10/2011

31 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 5-33, Amido Fall 2011 Membro di Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,445