Introduzione

The battery acts as an internal power source for the device. In case this battery needs to be replaced, this simple guide will walk you through the steps of removing the current battery to replace it.

Parti

Nessuna parte richiesta.

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Lift the cover up and off the device.
    • Lift the cover up and off the device.

  5. Locate the battery on the motherboard.
    • Locate the battery on the motherboard.

  6. Using the spudger, wedge the metal clip off of the top surface of the battery.
    • Using the spudger, wedge the metal clip off of the top surface of the battery.

  7. Use your finger to push the battery sideways out of its holder.
    • Use your finger to push the battery sideways out of its holder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cody Hunter

Membro da: 10/10/2011

22 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 5-33, Amido Fall 2011 Membro di Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,371