Aggiusta la tua roba Comunità Store

Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement

Introduzione

Use this guide to disassemble the wheel and get access to the interior components of your Thustmaster Ferrari 458 Spider Racing Wheel.

Cosa ti serve

  1. Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement, Bottom Cover: passo 1, immagine 1 di 1

    • Remove the black 10mm using a JIS #1 screw driver.

    • There are 12 screws.

    • Two of the screws are deep inside the device you might need to use a slim screwdriver.

    • In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

    Modifica

  3. Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement: passo 2, immagine 1 di 2 Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement: passo 2, immagine 2 di 2

    • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

    • Gently pull apart both halves of device to access inside.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Mohammed Alsogair

Membro da: 10/18/17

339 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

USF Tampa, Team S1-G33, Cagle Fall 2017 Membro di USF Tampa, Team S1-G33, Cagle Fall 2017

USFT-CAGLE-F17S1G33

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 5,450