Salta al contenuto principale

ThinkPad X1 Carbon Fingerprint Reader Replacement

Cosa ti serve

  1. ThinkPad X1 Carbon Fingerprint Reader Replacement, Fingerprint Reader: passo 1, immagine 1 di 1
    • Unscrew the seven screws located on the back of the device.

  2. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 2, immagine 1 di 1
    • Slide the plastic opening tool along the edge of the device to separate the keyboard tray.

  3. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 3, immagine 1 di 1
    • Flip the device over and open it to lift the keyboard tray from the body of the device.

  4. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 4, immagine 1 di 1
    • Use the plastic opening tool to gently release the ribbon cable attached to the keyboard.

    • You may now place the device off to the side. The rest of the repair takes place on the keyboard tray.

  5. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 5, immagine 1 di 1
    • Locate the Fingerprint Reader and metal frame on the left side of the keyboard tray.

  6. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 6, immagine 1 di 1
    • Unscrew the two silver screws to remove the metal frame.

  7. ThinkPad X1 Carbon Fingerprint Reader Replacement: passo 7, immagine 1 di 1
    • Remove the ribbon cable connected to the board.

    • Remove and Replace the Fingerprint Reader board and metal frame.

    • This connection does not have a lock, please pull the ribbon away from the board. Do not attempt to lift the connection.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 2,685