Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the keyboard and unscrew the 15 back screws. The screws in the palm rest must be unscrewed and the palm rest removed to access the 6 screws at the bottom of the keyboard. (There are 2 lengths of screws the shorter ones are for the palm rest) There are also 2 screws under the nonslip pads of the palm rest.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Release the front part using a spudger or flat screwdriver to gently pry. Lift off carefully.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently lift up the plastic film in the top right corner.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
3 Commenti
So what do I do after I take apart my keyboard?
this guide is currently missing some steps. If you have figured it out, pls edit this guide.
tayola -
Desolder and replace LEDs the size of a grain of sand xD
This is definitely not a job I'd mark as "easy".