Salta al contenuto principale

Logitech G910 Lights Replacement

Cosa ti serve

  1. Logitech G910 Lights Replacement, Lights: passo 1, immagine 1 di 1
    • Unplug the keyboard from the computer.

  2. Logitech G910 Lights Replacement: passo 2, immagine 1 di 1
    • Flip the keyboard and unscrew the 15 back screws. The screws in the palm rest must be unscrewed and the palm rest removed to access the 6 screws at the bottom of the keyboard. (There are 2 lengths of screws the shorter ones are for the palm rest) There are also 2 screws under the nonslip pads of the palm rest.

  3. Logitech G910 Lights Replacement: passo 3, immagine 1 di 1
    • Release the front part using a spudger or flat screwdriver to gently pry. Lift off carefully.

  4. Logitech G910 Lights Replacement, Lift the film: passo 4, immagine 1 di 2 Logitech G910 Lights Replacement, Lift the film: passo 4, immagine 2 di 2
    • Gently lift up the plastic film in the top right corner.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

3 Commenti

So what do I do after I take apart my keyboard?

CuddlyZebesian - Replica

this guide is currently missing some steps. If you have figured it out, pls edit this guide.

tayola -

Desolder and replace LEDs the size of a grain of sand xD
This is definitely not a job I'd mark as "easy".

squallloire -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 77

Tutti i Tempi: 5,947