Salta al contenuto principale

The Beatles Rock Band Drum Set Drum Pad Replacement

Cosa ti serve

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: passo 1, immagine 1 di 2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: passo 1, immagine 2 di 2
    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 2, immagine 1 di 2 The Beatles Rock Band Drum Set Drum Pad Replacement: passo 2, immagine 2 di 2
    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

  3. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 3, immagine 1 di 1
    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 4, immagine 1 di 1
    • The sensor can be peeled off of the drum pad.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Zach Richter

Membro da: 01/24/17

549 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 13-3, Banghart Winter 2017 Membro di Cal Poly, Team 13-3, Banghart Winter 2017

CPSU-BANGHART-W17S13G3

4 Membri

5 Guide realizzate

Un commento

Where can you buy replacement sensor?

Barry Howard - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 62

Tutti i Tempi: 7,906