Salta al contenuto principale

Tea Kettle Switch Replacement

Cosa ti serve

  1. Tea Kettle Switch Replacement, Switch: passo 1, immagine 1 di 3 Tea Kettle Switch Replacement, Switch: passo 1, immagine 2 di 3 Tea Kettle Switch Replacement, Switch: passo 1, immagine 3 di 3
    • Before you start, disconnect the device from its power source.

    • Remove the two bottom screws.

    • Remove the two top screws.

    • Remove the handle from the kettle.

  2. Tea Kettle Switch Replacement: passo 2, immagine 1 di 2 Tea Kettle Switch Replacement: passo 2, immagine 2 di 2
    • Pull out the switch.

    • If you pull too hard, you may dislodge another part as well as the spring that are both positioned behind the switch.

  3. Tea Kettle Switch Replacement: passo 3, immagine 1 di 1
    • Click the replacement switch back into the handle part.

  4. Tea Kettle Switch Replacement: passo 4, immagine 1 di 1
    • Insert the light back into the switch.

    • This might take some extra attention, so be precise.

  5. Tea Kettle Switch Replacement: passo 5, immagine 1 di 1
    • Place the handle part back on the frame.

  6. Tea Kettle Switch Replacement: passo 6, immagine 1 di 1
    • Plug in the kettle.

    • Press down on the switch to check if it works again.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

3 Commenti

How much would it cost to repair this kettle switch live points?

Bheki Valoyi - Replica

How much would it cost to fix the tea kettle switch live points?

Bheki Valoyi - Replica

Can the kettle gadgets be replaced with another one

Michael Ombech - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 27

Ultimi 30 Giorni: 141

Tutti i Tempi: 25,016