Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Tapwave T2907US Zodiac 2 Battery Replacement

Cosa ti serve

  1. Tapwave T2907US Zodiac 2 Battery Replacement, Back Cover: passo 1, immagine 1 di 1
    • Remove the four Torx T5 screws from the back panel.

  2. Tapwave T2907US Zodiac 2 Battery Replacement: passo 2, immagine 1 di 1
    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

  3. Tapwave T2907US Zodiac 2 Battery Replacement, Battery: passo 3, immagine 1 di 1
    • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

  4. Tapwave T2907US Zodiac 2 Battery Replacement: passo 4, immagine 1 di 1
    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Team

Cal Poly, Team 10-33, Amido Winter 2012 Membro di Cal Poly, Team 10-33, Amido Winter 2012

CPSU-AMIDO-W12S10G33

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,221