Aggiusta la tua roba Comunità Store

Tagital T9X Camera Replacement

Cosa ti serve

  1. Tagital T9X Camera Replacement, Back Cover: passo 1, immagine 1 di 1

    • With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.

    • These screws are extremely easy to lose. Be sure to store them in a safe place.

    Modifica

  2. Tagital T9X Camera Replacement: passo 2, immagine 1 di 1

    • Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.

    • The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.

    Modifica

  4. Tagital T9X Camera Replacement, Camera: passo 3, immagine 1 di 1

    • Using tweezers, carefully remove the cloth covering from the ribbon connector for the camera.

    Modifica

  5. Tagital T9X Camera Replacement: passo 4, immagine 1 di 1

    • Use the tip of the spudger or your fingernail to flip up the small flap on the ZIF connector.

    • Carefully remove the ribbon cable from the connector.

    Modifica

  6. Tagital T9X Camera Replacement: passo 5, immagine 1 di 1

    • Remove the camera from its position at the top of the tablet.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 144