Aggiusta le tue cose Community Store

TOSHIBA Satellite E45W-C4200X Keyboard Replacement

Introduzione

This guide will walk you through the necessary steps for replacing the Keyboard in your Toshiba Satellite E45W-C4200X.

The Keyboard is a vital piece of hardware that is used to input information and writing.

Before using this guide, make sure to review the troubleshooting page to ensure the Keyboard  will need to be replaced.

Make sure to power off your laptop completely and disconnect from any external power source prior to beginning the process.


Cosa ti serve

  1. TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Cooling Fan: passo 1, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Cooling Fan: passo 1, immagine 2 di 2

    • Using the phillips #1 screwdriver, remove the ten 1 mm screws from the back panel of the device.

    Modifica

  2. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 2, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 2, immagine 2 di 2

    • Use plastic opening tool to separate the back cover from the laptop.

    • Go slowly and be careful as the plastic can crack.

    • It is recommend that you start from a corner and run the tool along the edge.

    Modifica

  3. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 3, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 3, immagine 2 di 2

    • Remove the four .5 mm screws that secure the heat sink using a Phillips #1 screwdriver.

    Modifica

  4. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 4, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 4, immagine 2 di 2

    • Remove the two 1 mm screws that secure the cooling fan using a Phillips #1 screwdriver.

    Modifica

  5. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 5, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 5, immagine 2 di 2

    • Disconnect the fan cord from the harness.

    • Remove the cooling fan and heat sink from the laptop.

    Modifica

  7. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 6, immagine 1 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 6, immagine 2 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 6, immagine 3 di 3

    • Carefully peel off the tape holding the heat sink onto the cooling fan.

    • Peel carefully as the tape goes around all four sides.

    • Remove the cooling fan from the heat sink.

    Modifica

  8. TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Motherboard: passo 7, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Motherboard: passo 7, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Acquista

    • Unplug the connection to the battery.

    • Mark sure you are using the anti-static wrist strap for the duration of this replacement.

    Modifica

  9. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 8, immagine 1 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 8, immagine 2 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 8, immagine 3 di 3

    • Remove all remaining external wire harnesses from the circuit board.

    • It is recommended that you use labels or take pictures of the wires you remove to assist in the re-connection.

    Modifica

  10. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 9, immagine 1 di 1

    • Remove the three screws from the metal bracket on the left side of the circuit board using a Phillips #1 screwdriver.

    • Remove the bracket.

    Modifica

  11. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 10, immagine 1 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 10, immagine 2 di 3 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 10, immagine 3 di 3

    • Remove the two screws from the black plastic cover using a Phillips #1 screwdriver.

    • Remove the black plastic cover.

    Modifica

  12. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 11, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 11, immagine 2 di 2

    • Using a Phillips #1 screwdriver, remove the remaining two screws holding the circuit board in place.

    • Carefully remove the motherboard from the device.

    Modifica

  13. TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Keyboard: passo 12, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement, Keyboard: passo 12, immagine 2 di 2

    • Remove the two 1 mm screws from the black plastic cover using the Phillips #1 screwdriver.

    Modifica

  14. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 13, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 13, immagine 2 di 2

    • Use the Phillips #00 screwdriver to remove the three 0.5 mm screws from metal bracket.

    Modifica

  15. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 14, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 14, immagine 2 di 2

    • Use the Phillips #000 screwdriver to remove the 44 (forty four) 0.5 mm screws on the existing silver panel.

    Modifica

  16. TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 15, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X Keyboard Replacement: passo 15, immagine 2 di 2

    • Pull up on the black tab that is on the silver panel to remove the keyboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 599