Salta al contenuto principale

TDK Life on Record A26 Battery Replacement

Cosa ti serve

  1. TDK Life on Record A26 Battery Replacement, Battery: passo 1, immagine 1 di 1
    • Get a replacement battery from the TDK company. The battery part number is E23-00059-01.

  2. TDK Life on Record A26 Battery Replacement: passo 2, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 2, immagine 2 di 2
    • Obtain the screwdriver and the T09 (Torx) bit from the iFixit toolkit and assemble them together.

  3. TDK Life on Record A26 Battery Replacement: passo 3, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 3, immagine 2 di 2
    • Use the T09-bit screwdriver to remove the two 8-mm torx screws on the bottom strip of the speaker.

  4. TDK Life on Record A26 Battery Replacement: passo 4, immagine 1 di 3 TDK Life on Record A26 Battery Replacement: passo 4, immagine 2 di 3 TDK Life on Record A26 Battery Replacement: passo 4, immagine 3 di 3
    • Remove the faceplate by using the pointy side of the black plastic spudger.

    • Stick the point of the spudger into one of the corners surrounding the faceplate and gently pull it up.

  5. TDK Life on Record A26 Battery Replacement: passo 5, immagine 1 di 1
    • Then exchange the T09 bit for a PH1 bit

  6. TDK Life on Record A26 Battery Replacement: passo 6, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 6, immagine 2 di 2
    • Use the PH1-bit screwdriver to remove the eight 11-mm Phillips head screws that are located behind the faceplate.

  7. TDK Life on Record A26 Battery Replacement: passo 7, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 7, immagine 2 di 2
    • Remove the one 7-mm Phillips head screw located on the lower left of the front of the speaker with the PH1-bit screwdriver.

  8. TDK Life on Record A26 Battery Replacement: passo 8, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 8, immagine 2 di 2
    • After all screws are removed, turn the speaker over to the back of the speaker.

  9. TDK Life on Record A26 Battery Replacement: passo 9, immagine 1 di 3 TDK Life on Record A26 Battery Replacement: passo 9, immagine 2 di 3 TDK Life on Record A26 Battery Replacement: passo 9, immagine 3 di 3
    • Use the blue plastic opening tool from the toolkit to pry off the back of the speaker, gradually moving around the device.

    • Make sure to open it evenly on all sides.

  10. TDK Life on Record A26 Battery Replacement: passo 10, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 10, immagine 2 di 2
    • Then remove the bottom narrow strip of plastic to uncover the battery.

  11. TDK Life on Record A26 Battery Replacement: passo 11, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 11, immagine 2 di 2
    • Follow the red, black, and white wires attached to the green battery sleeve down to the white small plug.

  12. TDK Life on Record A26 Battery Replacement: passo 12, immagine 1 di 2 TDK Life on Record A26 Battery Replacement: passo 12, immagine 2 di 2
    • Once you have found the white plug, gently grip the colored wires and carefully pull to remove the white plug from the speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

2 Commenti

This procedure is totally unnecessary! TDK has much simpler instructions. http://downloads.imationsupport.com/lor/...

Marty F - Replica

Actually, this page DID help me as the other “simpler” instrucions didn’t work, as I was unable to slide the battery cover after removing the two screws.In any case the entire procedure only took about ten minutes, so THANK YOU!

Sander - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 25

Tutti i Tempi: 6,894