Aggiusta la tua roba Comunità Store

Sylvania SDVD9004 Motherboard Replacement

Introduzione

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that involve delicate internal components.

Cosa ti serve

  1. Sylvania SDVD9004 Motherboard Replacement, Back cover: passo 1, immagine 1 di 1

    • Remove ten 7mm Phillips #0 screws.

    • Remove four 5mm Phillips #0 screws.

    Modifica

  2. Sylvania SDVD9004 Motherboard Replacement: passo 2, immagine 1 di 2 Sylvania SDVD9004 Motherboard Replacement: passo 2, immagine 2 di 2

    • Flip the device over.

    • Lift the top.

    Modifica

  3. Sylvania SDVD9004 Motherboard Replacement: passo 3, immagine 1 di 1

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Modifica

  5. Sylvania SDVD9004 Motherboard Replacement, CD Drive: passo 4, immagine 1 di 3 Sylvania SDVD9004 Motherboard Replacement, CD Drive: passo 4, immagine 2 di 3 Sylvania SDVD9004 Motherboard Replacement, CD Drive: passo 4, immagine 3 di 3

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Wedge head lightly between drive and bottom of tab.

    • Repeat on both sides.

    • Gently pull out ribbon

    Modifica

  6. Sylvania SDVD9004 Motherboard Replacement: passo 5, immagine 1 di 1

    • Drive Removal

    • Use Philip's screw driver to remove three 7 mm screws.

    • Rotate counter clockwise to loosen screws.

    Modifica

  7. Sylvania SDVD9004 Motherboard Replacement: passo 6, immagine 1 di 1

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Follow the red and black cables to the motherboard point of attachment.

    • Use a Flat head screwdriver.

    • Place head of driver into the grove of plug and port.

    • Wedge on all sides evenly to work out plug slowly.

    • Remove small and large plugs.

    Modifica

  8. Sylvania SDVD9004 Motherboard Replacement, Motherboard: passo 7, immagine 1 di 3 Sylvania SDVD9004 Motherboard Replacement, Motherboard: passo 7, immagine 2 di 3 Sylvania SDVD9004 Motherboard Replacement, Motherboard: passo 7, immagine 3 di 3

    • Remove Ribbon from Rear Panel

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Modifica

  9. Sylvania SDVD9004 Motherboard Replacement: passo 8, immagine 1 di 1

    • Anchor screw removal

    • Use Philip's head screwdriver

    • Place head of driver into screw on mother board.

    • Rotate counter clockwise

    • Remove all four screws

    Modifica

  10. Sylvania SDVD9004 Motherboard Replacement: passo 9, immagine 1 di 1

    • Lift motherboard to expose battery

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Sarah Henry

Membro da: 10/31/16

417 Reputazione

4 Guide realizzate

Distintivi: 4

+ 1 altro distintivo

Team

Baylor, Team 5-10, Williams Fall 2016 Membro di Baylor, Team 5-10, Williams Fall 2016

BU-WILLIAMS-F16S5G10

2 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 9

Tutti i Tempi: 389