Aggiusta la tua roba Comunità Store

Swann Doorphone Video Intercom Doorbell Replacement

Introduzione

This guide can be used to help replace a broken or stuck Doorbell located on the outside camera on your Swann Doorphone Video Intercom.

Cosa ti serve

  1. Swann Doorphone Video Intercom Doorbell Replacement, Camera: passo 1, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement, Camera: passo 1, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement, Camera: passo 1, immagine 3 di 3

    • Flip the outdoor camera over so that the underside is facing up.

    • Remove the back cover by grabbing the sides of the camera and pulling towards your body.

    Modifica

  2. Swann Doorphone Video Intercom Doorbell Replacement: passo 2, immagine 1 di 2 Swann Doorphone Video Intercom Doorbell Replacement: passo 2, immagine 2 di 2

    • With the back cover of the outdoor camera off, press the first gray button, with blue wire underneath, down as shown in the picture.

    • While pressing the gray square button, remove the blue wire from the first opening under the button.

    • Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.

    Modifica

  3. Swann Doorphone Video Intercom Doorbell Replacement: passo 3, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 3, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 3, immagine 3 di 3

    • Remove the other wires using the same steps as the blue wire.

    • Using the JIS #0 screwdriver, remove the 2mm screws from the back plate.

    • Remove the back plate by pulling the plate away from the device.

    Modifica

  4. Swann Doorphone Video Intercom Doorbell Replacement: passo 4, immagine 1 di 2 Swann Doorphone Video Intercom Doorbell Replacement: passo 4, immagine 2 di 2

    • Using the JIS #0 screwdriver, remove the 1mm screws from behind the camera.

    Modifica

  6. Swann Doorphone Video Intercom Doorbell Replacement: passo 5, immagine 1 di 2 Swann Doorphone Video Intercom Doorbell Replacement: passo 5, immagine 2 di 2

    • Using one of the tweezers from the Precision Tweezers Set, gently place them around the wire connector attached to the camera.

    • Pull slowly in the direction of the cables until the connector is no longer attached.

    Modifica

  7. Swann Doorphone Video Intercom Doorbell Replacement: passo 6, immagine 1 di 2 Swann Doorphone Video Intercom Doorbell Replacement: passo 6, immagine 2 di 2

    • Remove the camera from the device.

    Modifica

  8. Swann Doorphone Video Intercom Doorbell Replacement, Doorbell: passo 7, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement, Doorbell: passo 7, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement, Doorbell: passo 7, immagine 3 di 3

    • Using your fingers, take hold of the wire connector attached to the main board

    • Pull slowly towards your body until the connector is no longer attached.

    Modifica

  9. Swann Doorphone Video Intercom Doorbell Replacement: passo 8, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 8, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 8, immagine 3 di 3

    • Using the JIS #0 screwdriver, remove the 2 mm screws diagonal from each other from the main board.

    Modifica

  10. Swann Doorphone Video Intercom Doorbell Replacement: passo 9, immagine 1 di 2 Swann Doorphone Video Intercom Doorbell Replacement: passo 9, immagine 2 di 2

    • Gently pull the main board away from the inside of the device and leave to the side.

    • The main board will still be attached to the device by a remaining set of wires, but do not need to be removed.

    Modifica

  11. Swann Doorphone Video Intercom Doorbell Replacement: passo 10, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 10, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 10, immagine 3 di 3

    • Using the JIS #0 screwdriver, remove the 1mm screws from each side of the doorbell spring-loaded cover-plate

    • While removing the second screw, hold down the cover-plate with your index finger to prevent the plate from springing out.

    Modifica

  12. Swann Doorphone Video Intercom Doorbell Replacement: passo 11, immagine 1 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 11, immagine 2 di 3 Swann Doorphone Video Intercom Doorbell Replacement: passo 11, immagine 3 di 3

    • Remove the black circular doorbell cover-plate.

    • Remove the metal circular doorbell button.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 5 altri collaboratori

Joseph Kelemen

Membro da: 02/14/18

227 Reputazione

1 Guida realizzata

Distintivi: 3

Team

USF Tampa, Team S2-G4, Eyestone Spring 2018 Membro di USF Tampa, Team S2-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S2G4

4 Membri

5 Guide realizzate

Un commento

Thanks for posting. It is great to find new sources of doorbell replacement information.

Jeselle Arce - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 16

Tutti i Tempi: 1,115