Salta al contenuto principale

SwagTron T1 Back Panels Replacement

Cosa ti serve

  1. SwagTron T1 Back Panels Replacement, Back Panels: passo 1, immagine 1 di 1
    • Ensure that the SwagTron is off.

    • Turn the SwagTron upside down to see the underside.

  2. SwagTron T1 Back Panels Replacement: passo 2, immagine 1 di 3 SwagTron T1 Back Panels Replacement: passo 2, immagine 2 di 3 SwagTron T1 Back Panels Replacement: passo 2, immagine 3 di 3
    • Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

    • The screws are tightly in place. It will take effort to screw them out.

    • The panel is still attached to the SwagTron by wires that go to the motherboard.

    • Carefully lift the panels off

  3. SwagTron T1 Back Panels Replacement: passo 3, immagine 1 di 3 SwagTron T1 Back Panels Replacement: passo 3, immagine 2 di 3 SwagTron T1 Back Panels Replacement: passo 3, immagine 3 di 3
    • Follow the wires from the panels to the motherboard.

    • You may need to cut any zip ties that are holding the wires together.

    • There is one connection on the battery side and three on the other side that must be removed.

    • These connections may be difficult to remove. Try to securely press the connection and pull firmly.

    • Your back panels are now completely removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S17-G5, Banghart Spring 2017 Membro di Cal Poly, Team S17-G5, Banghart Spring 2017

CPSU-BANGHART-S17S17G5

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 664