Salta al contenuto principale

Introduzione

If your touchscreen does not respond to a finger or stylus, you need to replace the touchscreen sensor. As a prerequisite, use the motherboard replacement guide to reveal the touchscreen after opening the back.

Ricambi

Nessuna parte specificata.

  1. Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover. Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover.
    • Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover.

  2. Tear the yellow tape in order to make the front and back covers free to disassemble. Tear the yellow tape in order to make the front and back covers free to disassemble. Tear the yellow tape in order to make the front and back covers free to disassemble.
    • Tear the yellow tape in order to make the front and back covers free to disassemble.

  3. Separate the two covers. Put aside the white sheets. Do not put the white sheets on any surface. Only keep them in the covers.
    • Separate the two covers.

    • Put aside the white sheets.

    • Do not put the white sheets on any surface. Only keep them in the covers.

    • Use the tweezers to remove the sting glue and separate the glue from the sensor.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Payton Butler

Membro da: 18/09/2018

196 Reputazione

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 167