Introduzione

In this replacement guide, we will show you how to remove and replace the motherboard in your tablet. This will require some soldering so be sure to have your soldering kit warmed up and your safety goggles on.

  1. Use the plastic opening tool to separate the screen from the back cover.
    • Use the plastic opening tool to separate the screen from the back cover.

    Aggiungi Commento

  2. Use the tweezers to lift the tab shown in the picture, and remove the orange ribbon from it gently. Repeat for all three ribbons  on the device.
    • Use the tweezers to lift the tab shown in the picture, and remove the orange ribbon from it gently. Repeat for all three ribbons on the device.

    Aggiungi Commento

    • Use the Phillips 1.5 mm screwdriver (Phillips #000) to unscrew the green motherboard from the body at the three points

    • Remove the washers (red)

    Aggiungi Commento

    • Use a hot soldering tool to desolder the wires connecting the motherboard to the speaker. Desolder the wires connecting the motherboard to the battery.

      • Red: Speakers

      • Orange: Battery

      • Yellow: LED

    • Check if your replacement motherboard comes with an LED. You may have to desolder the LED from your old motherboard and solder it to your replacement.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sakshi Labhane

Membro da: 07/04/2018

139 Reputazione

1 Guida realizzata

Team

IUPUI, Team S1-G1, Wilson Spring 2018 Membro di IUPUI, Team S1-G1, Wilson Spring 2018

IUPUI-WILSON-S18S1G1

5 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 60