Salta al contenuto principale

Supersonic Matrix SC-91MID Back cover Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Supersonic Matrix SC-91MID Back cover Replacement, Back cover: passo 1, immagine 1 di 1
    • Use an opening tool to separate the back cover of the tablet by wedging the tool into the crease between the back cover and touchscreen.

    • Work your way around the perimeter of the tablet to detach the back cover and remove it carefully so you don't rip any cables attached.

  2. Supersonic Matrix SC-91MID Back cover Replacement: passo 2, immagine 1 di 1
    • Use a spudger to carefully disconnect the display ribbons from the motherboard.

  3. Supersonic Matrix SC-91MID Back cover Replacement: passo 3, immagine 1 di 1
    • To remove the battery, use the spudger to pry the battery up and away from the tablet.

    • You might have some difficulty removing due to glue holding the battery in place.

    • Work your way around the perimeter of the battery with the spudger or opening picks gently so you don't bend or puncture the battery.

  4. Supersonic Matrix SC-91MID Back cover Replacement: passo 4, immagine 1 di 2 Supersonic Matrix SC-91MID Back cover Replacement: passo 4, immagine 2 di 2
    • Use a spudger to remove the speakers.

    • To remove the motherboard, remove the three screws that hold the board in place with a Phillips screwdriver.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jake

Membro da: 03/23/17

213 Reputazione

2 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 111