Salta al contenuto principale

Introduzione

If the seat gets dirty, or the fabric is damaged, this guide will show you how to take the seat out.

Parti

Nessuna parte specificata.

  1. Remove the two silver 12.7 mm  #01 screws (1 on each side) holding the back of the seat to the frame. Remove the two silver 12.7 mm  #01 screws (1 on each side) holding the back of the seat to the frame.
    • Remove the two silver 12.7 mm #01 screws (1 on each side) holding the back of the seat to the frame.

  2. Unscrew the four silver 12.7 mm #01 screws (2 on each side)  holding the fabric along the handlebars on both sides.
    • Unscrew the four silver 12.7 mm #01 screws (2 on each side) holding the fabric along the handlebars on both sides.

  3. Kits di riparazione iPhone X

    Garanzia finita? Non preoccuparti, abbiamo la soluzione.

    Acquista ora

    Kits di riparazione iPhone X

    Garanzia finita? Non preoccuparti, abbiamo la soluzione.

    Acquista ora
  4. Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.
    • Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.

  5. After checking that all screws are unattached, pull the seat off. After checking that all screws are unattached, pull the seat off.
    • After checking that all screws are unattached, pull the seat off.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Pradeep Sangli

Membro da: 29/09/2015

116 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 11-5, Forte Fall 2015 Membro di Cal Poly, Team 11-5, Forte Fall 2015

CPSU-FORTE-F15S11G5

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 26

Tutti i Tempi: 798