Salta al contenuto principale

Introduzione

This guide will walk you through the disassembly of the Steam Link device made by Valve from 2015 to 2018

Parti

Nessuna parte specificata.

  1. Start by unplugging your device Power cord
    • Start by unplugging your device

    • Power cord

    • Ethernet

    • HDMI

  2. Start by removing the rubber bottom using the Guitar Pick or the Jimmy The first time, the adhesive may be difficult to remove
    • Start by removing the rubber bottom using the Guitar Pick or the Jimmy

    • The first time, the adhesive may be difficult to remove

  3. Remove the screws using a Torxx 6 bit Remove the screws using a Torxx 6 bit
    • Remove the screws using a Torxx 6 bit

  4. Open-up the bottom lid using guitar pics The first time you open it, it might be difficult to open. Start by reaching the rounded, bottom-right corner
    • Open-up the bottom lid using guitar pics

    • The first time you open it, it might be difficult to open. Start by reaching the rounded, bottom-right corner

  5. Marvel ArmV7 CPU Vivante GC1000 GPU
    • Marvel ArmV7 CPU

    • Vivante GC1000 GPU

Conclusione

To reassemble your device, follow the steps in the opposite order

Altre 3 persone hanno completato questa guida.

bonjour esque cette carte peu servire comme raspberry merci

thesmoking gta - Replica

Non, seule une image signée par Valve peut être lancée. Elle a un accès SSH comme indiqué sur la page du SDK cependant. Notez qu'elle n'est plus fabriquée depuis décembre, donc elle n'est plus vraiment disponible.

Jorys Paulin (Jorys_Paulin) -

Somewhat unworthy Teardown. Naming the CPU brand wrong and not giving any relevant information like schematics or ICs used. THIS is by far better: https://www.allaboutcircuits.com/news/te...

EDIT: Oh, it is a community post, sry. But more information would be nice. E.g. where is the massive heat sink? There are lots of parts missing.

Jan Seewald - Replica

Hello, this is my first (and only) teardown. I made it just for fun, really. I opened my Steam Link once and then decided to put it on the internet, because I found they weren’t that much photos of it around.

The heat sink is a large piece of aluminum, and now I realize I forgot to add it, my mistake.

Jorys Paulin (Jorys_Paulin) -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 32

Tutti i Tempi: 674