Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The ready light is a simple LED that shows when the Barista has heated up to its needed temperature. This LED may burn out or its connectors may loosen.
Cosa ti serve
-
-
-
Locate the ready light.
-
Gently push the fixture against the Barista wall.
-
Pull the fixture straight up to release it.
-
Note: The fixture works as a spring.
-
Note: The green cover from the front panel will "pop" off. Do not lose the green cover.
-
Disconnect the wire lead connectors.
-
Remove the ready light unit (fixture).
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
4 Commenti
Beee2smoove.
Youth and sports for
Ttuii addinsists